Home / Feedback Actuators
collection-banner

Harness Precision with our Feedback Actuators

Introducing our latest collection of actuators featuring Optical Sensors for unparalleled feedback accuracy. The OS Series is designed to revolutionize your automation needs with seamless positioning control. Engineered with built-in optical sensors, these feedback linear actuators deliver real-time feedback, ensuring precise positioning every time. With three force options ranging from 35 to 400 lbs, built-in limit switches, and high-grade aluminum construction, these actuators are built to exceed your expectations. Explore the benefits and drawbacks of different feedback options and elevate your control system with the Synchronous Control Board for synchronized movement across multiple actuators.

Voltage
Stroke (Inches)
Force (lb's)
12v electric super duty actuator
Super Duty Actuators In Stock
  • Force 220–450 lb's
  • Stroke 2–24 Inches
From ₱8,800.00 PHP
Utility Actuator
Utility Linear Actuator In Stock
  • Stroke 2–12 Inches
  • Force 110–330 lb's
₱8,800.00 PHP
12v Feedback  Linear Actuators
Feedback Rod Linear Actuators In Stock
  • Force 35–200 lb's
  • Stroke 2–12 Inches
₱9,000.00 PHP
Optical Feedback Linear Actuators
Optical Feedback Actuators In Stock
  • Force 35–400 lb's
  • Stroke 1–30 Inches
From ₱9,400.00 PHP
Bullet Series 36 Cal. Linear Actuators in silver
Bullet Series 36 Cal. Linear Actuators In Stock
  • Force 224 lb's
  • Stroke 6–24 Inches
₱10,800.00 PHP
Bullet Series 52 Cal. Linear Actuators
Bullet Series 50 Cal. Linear Actuators In Stock
  • Force 500–1124 lb's
  • Stroke 6–40 Inches
From ₱16,400.00 PHP
Micro Pen Actuator with Feedback
Micro Pen Actuator with Feedback In Stock
  • Force 4–22 lb's
  • Stroke 20–100 mm
₱8,000.00 PHP
Power Max Heavy Duty Actuators held in hand for scale
Power Max Heavy Duty Actuators - 900 to 1500lbs Force In Stock
  • Force 900–1500 lb's
  • Stroke 6–40 Inches
From ₱18,100.00 PHP

We're proud to introduce our new line of Actuators featuring Optical Sensors to provide feedback.

When you need to know the exact positioning of your actuators, the OS Series is what you need. These powerful feedback linear actuators come with a built-in optical sensor that provides feedback when you need it.  The OS Series has no built-in controller but does provide single-phase pulses as a position feedback signal that can be input to an external controller such as an Arduino. 

The OS series is equipped with a 10 hole optical encoder disk that with the gearing to the actuator output shaft will send 100 pulses/inch of stroke ( +/- 5 pulses).

There are three force options available ranging from 35 to 400 lbs. These units come equipped with built-in limit switches, are manufactured with high-grade aluminum outer and inner tubes, and come in various stroke lengths from 1" - 30".


Firgelli Actuator Feedback Video

Linear actuators with position feedback have either built-in Potentiometers, Hall sensors, or Optical Sensors.

We offer Linear Actuators with position feedback that have all 3 Feedback options. (Optical, Potentiometer, and Hall sensor)  each Feedback actuator type has its own benefits and drawbacks. As such we wrote an article about the advantages and disadvantages of each one, so you can really understand the difference to help you decide which will best suit your application. 

Article: Understanding how Feedback Linear Actuators work 

Our 3 types of Feedback Linear Actuators include:

  • Potentiometer linear actuators. These Actuators offer 3 wire voltage divider systems. Basically, the Potentiometer has 3 wires, where one wire represents 0v to represent the retracted position of the Actuator, +ve input voltage to represent 100% of the max travel. So if you put 12v into the potentiometer, that 12v will represent the maximum stroke. and the 3rd wire is used to actually measure the voltage along the actuator stroke.  
  • Optical feedback style. These feedback actuators use an optical sensor and a rotating disc with holes in it that are attached to the gearbox inside the Actuators. The position is created by counting the pulses from a starting position.
  • Hall Sensor Effect.  These Actuators are very similar to Optical, and in fact, the voltage input is the same and the output signal is the same. The Hall effect simply uses a magnetic disc that spins within the Gearbox, and the sensor just measures the number of revolutions by counting the positive and negative poles of the magnet. 
  • We also have separate Linear Potentiometers that could be used alongside a regular non-feedback linear actuator if you cannot use any of our feedback actuators. They are offered in strokes of up to 50" Inches, however, you only need to use whatever stroke you require to get the feedback you need. 
feedback actuators

Synchronous Control Board for Feedback Actuators

The Synchronous Control Board allows you to move multiple Linear actuators with feedback in sync with the same speed irrespective of load. Non-synchronized actuators can lead to bending loads which is likely to cause damage to the actuators.

The FCB-1 will allow the movement of up to four actuators in perfect synchronization, which is especially ideal for applications with uneven loading or where precise alignment is crucial. Operates with our feedback actuators such as our Super Duty Linear Actuator or the Utility Linear Actuator.

There are only two reasons you need a Linear actuator with feedback.

You need to know the position of the actuator because you need to move it to specific locations repeatedly.

You need to control two or more actuators to run at the same speed or in sync with each other. 

The level of precision you require and the controller you are going to use really dictate which type to use.  For creating a control system an Arduino Controller is by far the most common.  

If you would like to learn how a Linear Actuator works or what the inside of a Linear Actuator looks like click here

To learn the difference between all the different types of feedback types click here

feedback actuators control box

.

Frequently Asked Questions

An actuator becomes a feedback actuator when it is equipped with sensors that provide real-time feedback on its position. These sensors, such as Potentiometers, Hall sensors, or Optical Sensors, continuously monitor the actuator's position and provide feedback signals that indicate the actuator's exact location. This feedback enables precise control and positioning of the actuator, making it suitable for applications where accuracy and reliability are critical. In summary, what distinguishes a feedback actuator from a regular actuator is the inclusion of sensors that provide continuous feedback on its position during operation.

Each feedback option has its own benefits and drawbacks. Potentiometer actuators offer simplicity and cost-effectiveness but may lack the accuracy of Optical Sensors. Hall Sensor actuators provide similar performance to Optical Sensors but with a different sensing mechanism. Optical Sensors offer the highest precision but may come at a higher cost. Consider your application's requirements for accuracy, cost, and environmental conditions to choose the most suitable option. We go ino detail about each feedback type in our blog post.

Yes, you can synchronize multiple feedback actuators using a Synchronous Control Board. This allows you to control multiple actuators at the same speed, ensuring synchronized movement regardless of load. This feature is beneficial for applications requiring precise alignment or coordinated movement of multiple actuators.