The Bullet Series 50 Cal. Linear Actuator was developed to have a slim in-line motor design. Includes built-in hall effect sensor, which allows for synchronization, position and speed control. The hall effect feedback is vital to applications where multiple actuators must travel in sync. Popular within robotics, manufacturing, marine, off-road vehicles and home automation.
To move between two and four actuators in synchronous we recommend our dedicated control board, the FA-SYNC-X. A video tutorial of how to use this product is available here.
CAD models of this actuator can be found under Resources/3D Files. For further information review the specifications and technical drawings down below or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino.
Accessories sold separately include: Remote Controls - Switches - Micro-Controllers - Power Supplies
We offer them as standard in 12v or 24v, two force options, and in stroke lengths from 6 to 40 inches
| FA-BH50-500-12-(S) | FA-BH50-500-24-(S) | FA-BH50-674-12-(S) | FA-BH50-674-24-(S) | FA-BH50-1124-12-(S) | FA-BH50-1124-24-(S) | ||
| Push/Pull Force | 500 lbs. | 500 lbs. | 674 lbs. | 674 lbs. | 1124 lbs. | 1124 lbs. | |
| Static Force | 800 lbs. | 800 lbs. | 808 lbs. | 808 lbs. | 1348 lbs | 1348 lbs. | |
| Speed at full load | 0.48"/sec | 0.48"/sec | 0.145”/sec | 0.145”/sec | 0.08”/sec | 0.08”/sec | |
| Gear Ratio | 51:1 | 51:1 | 50:1 | 50:1 | 100:1 | 100:1 | |
| Voltage | 12V | 24V | 12V | 24V | 12V | 24V | |
| Max Current at full load | 10A | 8A | 3.9A | 2A | 4.7A | 2.3A | |
| Duty Cycle | 25% | ||||||
| Operating Temp. Range | -4°F to 149°F (-20°C to 65°C) | ||||||
| Protection Class | IP66 | ||||||
| No Load Noise Level | 50-70 dB | ||||||
| Diameter | 1.97" (50mm) | ||||||
| Outer Housing Material | Aluminum 6061 | ||||||
| Expansion Rod Material | Stainless Steel 304 | ||||||
| Limit Switch | Built-In non-adjustable | ||||||
| Feedback | Hall Effect Sensor | ||||||
| Pulses per inch of travel | 12000 | ||||||
| Feedback Voltage | 5V | ||||||
| Cable Length | 1.5 feet | ||||||
| Brackets | MB50 or MB50C | ||||||
| Stroke Length | Retracted Length | Extended Length | Weight (lb) | STEP File |
| 6" | 18.21" | 24.07" | 4.85 | FA-BH50-(F)-(V)-6 |
| 8" | 20.18" | 28.01" | 5.25 | FA-BH50-(F)-(V)-8 |
| 10" | 22.14" | 31.95" | 5.6 | FA-BH50-(F)-(V)-10 |
| 12" | 24.11" | 35.88" | 5.95 | FA-BH50-(F)-(V)-12 |
| 18" | 31.99" | 49.66" | 7.25 | FA-BH50-(F)-(V)-18 |
| 24" | 37.89" | 61.47" | 8.15 | FA-BH50-(F)-(V)-24 |
| 30" | 45.77" | 75.25" | 9.45 | FA-BH50-(F)-(V)-30 |
| 36" | 51.67" | 87.07" | 11.1 | FA-BH50-(F)-(V)-36 |
| 40" | 55.61" | 94.94" | 11.35 | FA-BH50-(F)-(V)-40 |
The Bullet Series 50 Cal. Linear Actuator was developed to have a slim in-line motor design. Includes built-in hall effect sensor, which allows for synchronization, position and speed control. The hall effect feedback is vital to applications where multiple actuators must travel in sync. Popular within robotics, manufacturing, marine, off-road vehicles and home automation.
To move between two and four actuators in synchronous we recommend our dedicated control board, the FA-SYNC-X. A video tutorial of how to use this product is available here.
CAD models of this actuator can be found under Resources/3D Files. For further information review the specifications and technical drawings down below or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino.
Accessories sold separately include: Remote Controls - Switches - Micro-Controllers - Power Supplies
We offer them as standard in 12v or 24v, two force options, and in stroke lengths from 6 to 40 inches
| FA-BH50-500-12-(S) | FA-BH50-500-24-(S) | FA-BH50-674-12-(S) | FA-BH50-674-24-(S) | FA-BH50-1124-12-(S) | FA-BH50-1124-24-(S) | ||
| Push/Pull Force | 500 lbs. | 500 lbs. | 674 lbs. | 674 lbs. | 1124 lbs. | 1124 lbs. | |
| Static Force | 800 lbs. | 800 lbs. | 808 lbs. | 808 lbs. | 1348 lbs | 1348 lbs. | |
| Speed at full load | 0.48"/sec | 0.48"/sec | 0.145”/sec | 0.145”/sec | 0.08”/sec | 0.08”/sec | |
| Gear Ratio | 51:1 | 51:1 | 50:1 | 50:1 | 100:1 | 100:1 | |
| Voltage | 12V | 24V | 12V | 24V | 12V | 24V | |
| Max Current at full load | 10A | 8A | 3.9A | 2A | 4.7A | 2.3A | |
| Duty Cycle | 25% | ||||||
| Operating Temp. Range | -4°F to 149°F (-20°C to 65°C) | ||||||
| Protection Class | IP66 | ||||||
| No Load Noise Level | 50-70 dB | ||||||
| Diameter | 1.97" (50mm) | ||||||
| Outer Housing Material | Aluminum 6061 | ||||||
| Expansion Rod Material | Stainless Steel 304 | ||||||
| Limit Switch | Built-In non-adjustable | ||||||
| Feedback | Hall Effect Sensor | ||||||
| Pulses per inch of travel | 12000 | ||||||
| Feedback Voltage | 5V | ||||||
| Cable Length | 1.5 feet | ||||||
| Brackets | MB50 or MB50C | ||||||
| Stroke Length | Retracted Length | Extended Length | Weight (lb) | STEP File |
| 6" | 18.21" | 24.07" | 4.85 | FA-BH50-(F)-(V)-6 |
| 8" | 20.18" | 28.01" | 5.25 | FA-BH50-(F)-(V)-8 |
| 10" | 22.14" | 31.95" | 5.6 | FA-BH50-(F)-(V)-10 |
| 12" | 24.11" | 35.88" | 5.95 | FA-BH50-(F)-(V)-12 |
| 18" | 31.99" | 49.66" | 7.25 | FA-BH50-(F)-(V)-18 |
| 24" | 37.89" | 61.47" | 8.15 | FA-BH50-(F)-(V)-24 |
| 30" | 45.77" | 75.25" | 9.45 | FA-BH50-(F)-(V)-30 |
| 36" | 51.67" | 87.07" | 11.1 | FA-BH50-(F)-(V)-36 |
| 40" | 55.61" | 94.94" | 11.35 | FA-BH50-(F)-(V)-40 |
We precision engineer and manufacture our products so you get direct manufacturers pricing. We offer same day shipping and knowledgeable customer support. Try using our Actuator Calculator to get help picking the right actuator for your application.
