|
This new line of Mini Linear Actuator is perfect for applications with little space available.
Our assortment of Mini Linear Actuators are ideal for lifting or moving OLED TV's,flaps, drawers, car stereos, custom GPS displays and hobbiest robotic designs. Their small size means they can be installed into the smallest of locations inside your boat, car, home or hobby design.
- Use MB4 brackets for these actuators
- Available sizes include 2", 4", 6", 8" and 12" stroke
- They all run on 12vdc and include built in limit switches
- Easy to wire up with a 4 channel remote control kit
- Always use a 5 AMP fuse when wiring to a car battery
Click here for PDF Spec sheet
| Model |
FA-MS-8-12-xx"
(High Speed) |
FA-MS-15-12-xx"
(Standard Force) |
| Input Voltage> |
12VDC, 2A at full load |
| Load Capacity |
8lb |
15lb |
| Static Load |
2 x Max Load Capacity |
| Stroke Length |
2" to 12" |
| Speed at No Load |
1.5"/sec |
0.75"/sec |
| Size |
1" wide x 1.25" deep, length see table below |
| Clevis End |
0.22" diameter |
| Screw |
ACME Screw |
| Gear Ratio |
5:1 |
20:1 |
| Duty Cycle |
20% |
| Operating Temperature |
-26ºC~65ºC (-15ºF~150ºF) (non-condensing) |
| Limit Switch |
Built-in (Factory preset, not movable) |
| IP Grade |
IP54 (dust and splash resistant) |
PLEASE NOTE DUE TO PACKAGING OF THESE ACTUATORS REFUNDS/RETURNS AND EXCHANGES ARE NOT POSSIBLE
|
